I can add object group and add into ACL on 6500 model. but I couldn't add "object-group ip address" on 7600 model.
@ 6500 model.
object-group ip address DENY01
[IP address] [Netmask]
exit
ip access-list extended OUT
10000 deny ip addrgroup DENY01 any
100000 permit ip any any
@ 7600
Router(config)#object-group ?
security Security object group
Router(config)#
c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICESK9-M), Version 15.3(3)S1, RELEASE SOFTWARE (fc1)
System image file is "sup-bootdisk:c7600s72033-advipservicesk9-mz.153-3.S1.bin"
cisco CISCO7609-S (R7000) processor (revision 1.0) with 983008K/65536K bytes of memory.
Processor board ID FOX114207VW
SR71000 CPU at 600MHz, Implementation 1284, Rev 1.2, 512KB L2 Cache
