11-19-2021 09:43 AM
Hello I hope some one can help.
We have several MDS switches in a customer network, recently they had to add more IVR zones, but when the customer try to add one new IVR zone
SAN12(config)# ivr zone name
IVR_mxoccsapcwd01_fcs2_new_MXOCCSTGSV1_SV2_N1P7_N2P14
Fabric is changing. Please retry the request later
We have check and we don't see any lock in the fabric.
Have someone has faced this issue?
Regards
11-19-2021 02:28 PM
12-01-2021 03:48 PM
Hello Bhavin.
Thank you for your answer. Right now the MDS device don't have PSS support. The Customer project manager is working on that.
We have a troubleshooting session and we were able to notice the following trying to commit the ivr changes on the devices.
MXOCCSAN02(config)# sh ivr session status
Last Action Time Stamp : Wed Dec 1 13:29:10 2021
Last Action : Commit
Last Action Result : Fail
Last Action Failure Reason : cfs(0x40b3002b)- Lock failed
MXOCCSAN04(config)# sh ivr session status
Last Action Time Stamp : Wed Dec 1 13:10:13 2021
Last Action : Commit
Last Action Result : Fail
Last Action Failure Reason : cfs(0x40b3002b)- Lock failed
MXOCCSAN12(config)# sh ivr session status
Last Action Time Stamp : Wed Dec 1 11:29:32 2021
Last Action : Commit
Last Action Result : Success
Last Action Failure Reason : none
Also we are trying to upgrade the MDS, but when checking for the instal all impact we got the following:
Notifying services about system upgrade. [# ] 0% -- FAIL.
Service "zone" returned error: Zone change in progress, ISSU rejected. (0x402000EF)
Pre-upgrade check failed. Return code 0x402000EF (Zone change in progress, ISSU rejected.).
We try to find the lock trough the fabric and we did not find anything.
Have you face something like that?
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide