cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1389
Views
0
Helpful
1
Replies

Move Module from 3 to 5

rgolmon
Level 1
Level 1

VEM server esx03 was added before VEM server esx01 to the VSM and therefore acquired Module 3.  Is there any way to mode the server attached to module 3 to module 5, so I can add server 1 to take module 3.

Mod  Server-IP        Server-UUID                           Server-Name
---  ---------------  ------------------------------------  --------------------
1    10.1.1.65        NA                                    NA
2    10.1.1.65        NA                                    NA

3    10.1.5.227       35383339-3134-5553-4530-35304e444b48  esx03

4    10.1.5.228       35383339-3134-5553-4530-35304e444b4a  esx04

1 Reply 1

rgolmon
Level 1
Level 1

Now for the Fix:

I placed ESX servers 3 and 4 into maintenance mode, and shut them down.  Then I entered the following commands:

no vem 3
vem 5
  host vmware id 35383339-3134-5553-4530-35304e444b48
no vem 4
vem 6
  host vmware id 35383339-3134-5553-4530-35304e444b4a

This moved ESX03 to slot 5 and ESX04 to slot 6, freeing up slot 3 and 4 for ESX01 and ESX02 respectively.

Review Cisco Networking for a $25 gift card