2ks are at the distribution/agg layer(layer 2 only)
The port-channel comes up and all appears well. However Netapp cannot ping(communicate) with Core-A's IP address(SVI) or the VRRP VIP. It can communicate with Core-B, but not the VIP. This same behavior occurs when the Netapps are directly connected to the cores.
A single connection directly to Core-A works; Core-A's SVI is ping-able, as well as the VIP.
There are other Netapp devices in the environment, wired like the diagram, that work. However, different models and OSs. The device in question is a FAS 8200, OS 9.4 P2.
We've really been through the ringer with this. The latest is that NetApp, on this version of software, no longer supports "Fast-Path." Not sure how this would affect us. But on the production netapp system, Fast-path is not enabled.
To participate in this event, please use the button to ask your questions
This special event - formerly known as Ask the Expert- is open only to Cisco Customers and Partners.
Many pages in the Cisco Community are acce...
About this webinar
Cisco Application Centric Infrastructure (ACI) is designed API first, making it an automator’s, developer’s and programmer’s dream. When every aspect of a product is available via an API, there is no limit to the scale, robustnes...
Community Live - Application Centric Infrastructure: Introduction and Configuration Best Practices
This special event - formerly known as webcast- is open only to Cisco Customers and Partners.
Many pages in the Cisco Community are accessible o...