Hi!
After insert command:
interface Vlan45
description ISCSI-ROUTED
no shutdown
no ip redirects
ip address 10.32.45.253/24
no ipv6 redirects
ip router ospf 1 area 0.0.0.0
hsrp version 2
hsrp 45
priority 255
ip 10.32.45.1"
i lost connection on my nexus other ssh, and after re-connect i see:
User Access Verification
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (C) 2002-2018, Cisco and/or its affiliates.
All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under their own
licenses, such as open source. This software is provided "as is," and unless
otherwise stated, there is no warranty, express or implied, including but not
limited to warranties of merchantability and fitness for a particular purpose.
Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or
GNU General Public License (GPL) version 3.0 or the GNU
Lesser General Public License (LGPL) Version 2.1 or
Lesser General Public License (LGPL) Version 2.0.
A copy of each such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://opensource.org/licenses/gpl-3.0.html and
http://www.opensource.org/licenses/lgpl-2.1.php and
http://www.gnu.org/licenses/old-licenses/library.txt.
f
F
^F
System is not ready. Please retry when system is ready.
Press F and hit <Enter> to start shell in Forced mode.
[Note: Shell may not be fully functional in Forced mode]
Entering Forced mode
and not reaction on any key...
HElp!
Software
BIOS: version 07.61
NXOS: version 9.2(2)
BIOS compile time: 04/06/2017
NXOS image file is: bootflash:///nxos.9.2.2.bin
NXOS compile time: 11/4/2018 21:00:00 [11/05/2018 09:11:06]
Hardware:
cisco Nexus9000 93180YC-EX chassis
