Hi Folks-
I have a few N7706 and N7710 Switches in which I need to upgrade the NXOS code from 8.2(1) to 8.2(6).
I'd like to do the upgrade via ISSU but want to ensure I avoid any problem issues etc.
Looking for any recommendations/guidance on doing upgrades via ISSU on N7706:
Current module configuration:
NA2-CORE-BB42-SW2-CORE2# sh mod
Mod Ports Module-Type Model Status
--- ----- ----------------------------------- ------------------ ----------
1 24 10/40 Gbps Ethernet Module N77-M324FQ-25L ok
2 24 10/40 Gbps Ethernet Module N77-M324FQ-25L ok
3 0 Supervisor Module-2 N77-SUP2E ha-standby
4 0 Supervisor Module-2 N77-SUP2E active *
5 48 1/10 Gbps Ethernet Module N77-F348XP-23 ok
6 48 1/10 Gbps Ethernet Module N77-F348XP-23 ok
Mod Sw Hw
--- --------------- ------
1 8.2(1) 1.0
2 8.2(1) 1.0
3 8.2(1) 1.5
4 8.2(1) 1.5
5 8.2(1) 1.9
6 8.2(1) 1.5
Mod MAC-Address(es) Serial-Num
--- -------------------------------------- ----------
1 00-2f-5c-fd-09-cc to 00-2f-5c-fd-0a-2f JAE22470M8Q
2 34-f8-e7-a5-87-f4 to 34-f8-e7-a5-88-57 JAE224309EC
3 00-aa-6e-ef-79-31 to 00-aa-6e-ef-79-43 JAE22300CXA
4 70-b3-17-71-51-dc to 70-b3-17-71-51-ee JAE22500509
5 70-b3-17-ee-a6-98 to 70-b3-17-ee-a6-d3 JAE23022NU9
6 b0-aa-77-b8-a6-dc to b0-aa-77-b8-a7-17 JAE191106RS
Mod Online Diag Status
--- ------------------
1 Pass
2 Pass
3 Pass
4 Pass
5 Pass
6 Pass
Xbar Ports Module-Type Model Status
--- ----- ----------------------------------- ------------------ ----------
1 0 Fabric Module 2 N77-C7706-FAB-2 ok
2 0 Fabric Module 2 N77-C7706-FAB-2 ok
3 0 Fabric Module 2 N77-C7706-FAB-2 ok
4 0 Fabric Module 2 N77-C7706-FAB-2 ok
5 0 Fabric Module 2 N77-C7706-FAB-2 ok
6 0 Fabric Module 2 N77-C7706-FAB-2 ok
Xbar Sw Hw
--- --------------- ------
1 NA 1.1
2 NA 1.1
3 NA 1.1
4 NA 1.1
5 NA 1.1
6 NA 1.1
