Hi,I am using this tool to upgrade 93180yc-ex switch and part of the process it tries to copy the OS to the switch and if its there it says don't copy the image and then runs the install command. however, for some switches its failing at the copy SCP...
Forum Posts
Been dealing with a possible bad Nexus 3172T switch in a VPC pair. After an upgrade, an uplink port in MEC on the Secondary Nexus connection to the Core failed. Both Primary and Secondary in VPC pair have 2x10G connections to the Core. We have tried...
Resolved! Upgrading EPLD on N9k
Hi, I'm in the process of upgrading to the latest EPLD and I came to this instruction that states to use this command if you don't need to upgrade the bios "boot nxos bootflash:n9000-dk9.9.3.5.bin." I don't have this file in bootflash and I'm not sur...
Resolved! C2232TM Fex'es failing image download
Hi We had a software upgrade and we lost four N2K-C2232TM-10GE connected to one of our Nexus 5596UP chassis. We have redundancy for 99% so there's not an emergency but... The Fex'es is going in to a boot loob trying to do a image download. Tried on ...
Hello! My first post.Yes, everything seems to be working, but I have a few questions:I have:2 NXOS 3172PQ (7.0 (3) I7 (8)) and1 WS-C3750E-48TD-E (universalk9-mz.152-4.E10) VPC member 1- When I finished the settings, the SVI at Core_48 were not UP in ...
In the Licensing Cisco NX-OS Software Features document I see the following licenses in the section "Feature-Based Licenses for the Cisco Nexus 9000 Series in Cisco NX-OS Mode":N9K-LIC1-24P - 24-port license for Cisco Nexus 93108TC-EX,93108TC-FX,9318...
Resolved! EVPN and VRFs
Looking into using EVPN by watching this video: https://www.youtube.com/watch?v=D9k9_hRdrGc In a very simple topology (6 switches) What is the easiest way to setup EVPN with Anycast Gateway when it comes to the VRF (tenant) aspect? I have one network...
Hello I would like to setup a new OSPF device on a vlan/subnet where 6 other NX-OSdevices are already operating, used as a transit segment: unfortunately all devicesrun MD5 authentication on their interfaces, and the secret is type 3 encrypted (Igues...
Hi, Can anyone offer any clarification on the use of "system routing template-internet-peering" on a Nexus N9K-C9336C-FX2. When this is configured, the following message is generated: switch(config)# system routing template-internet-peering Warning: ...
Hi, I can't console to any of the switches from our terminal servers for some reason and getting the following error:%connections to that host not permitted from this terminal how can I go by troubleshooting this? regards,
Hello, 1.What is the Generalized-PTP mode on Cisco NX-OS version 9.3.3.I am aware of Boundary clock mode and Transparent clock mode. 2. Which is most affordable Cisco switch with PTP feature.
The ISE device in my office primary datacenter generating the error - "12950 - Supplicant sent malformed PEAP message - bad record MAC". Please help me to resolve this.
When we upgraded our 5K's recently we experienced an issue where the port-profile inheritance was removed and replaced by the port-profile commands minus the VPC ORPAN-PORT SUSPEND command which was also removed from the port-profile configuration. T...
The other day I had an ASIC failure that took out some ports. One of these ports just happened to be the interface used for VPC Keep Alive Link between two Nexus switches and my vpc topology became unstable. Due to the latter, it got me thinking abou...
hello, after upgrade NXOS me see error:show license usageFeature Ins Lic Status Expiry Date CommentsCount--------------------------------------------------------------------------------VPN_FABRIC No - Unused -NXOS_OE_PKG No - Unused -TP_SERVICES_PKG ...
