DevNet General Discussions

Below is a partial config that I am using for a cisco 3850 L3 switch. We are trying to monitor network traffic to a Solarwinds server. Does anyone notice anything out of the ordinary?I have only recently hired on at this establishment and this is som...

Regarding file transfer, if I want to archive file transfers an external DB, what is needed? I assume an additional file server is needed, but it is unclear about how to set this up. Is there any documentation on this?

I have attached the result of running "show spanning-tree vlan 200" command here from a screenshot I have. The question is based on Fa0/3 Altn port status then this switch must be running Rapid STP which means every switch including root bridge sends...

Devnet team, were the sessions that were streamed also recorded?Watched few live on youtube but would like to see the ones I have missed.Thanks in advance

Hello Guys,i am working now ACI Programmability options and during setup my PC enviroment to start the module , it's mandtory to download SDK Cobra files from APIC and as per their instructions i have to click on below link then login then download t...

Wlc Brasil drops all china laptop every 20 minutes , I have configured as an interface for user id which goes thru Controller over only one SSID each  20 minutes drops only China laptops, does anyone could give me a hand up?

Buenos dias, Tengo un cisco ASA 5520 con las siguientes interfaces configuradas: INSIDE: 192.168.100.1OUTSIDE: 181.49.33.66WAN: 172.30.1.36Ademas, tengo una VPN configurada que me asigna una direccion IP de un Pool de la interfaz INSIDE (192.168.100....

Hi Friends,I do have a weird one-way voice problem. 1. I am not using Cisco Voice devices.2. I am using Polycom Phones and Lync Server.3. No ACLs or Firewalls in the network setup between the switches.But, the main problem which i am facing is with t...

Hi, I'm trying to have ISE (2.3) receive info from my switches by receiving SNMP traps. I've configured the switches to send the traps to ISE, and I even see them in Wireshark, but I get an ICMP port unreachable for each one (port 162). I've followed...

I have a CUCM 11 setup with an external PostgreSql DB, set up according to the documentation here:Database Setup for IM and Presence Service on Cisco Unified Communications Manager, Release 11.0(1) - PostgreSQL Install…I also have archiving enabled a...

We are attempting to integrate the presence API into a custom directory application displaying a user's presence. I've read through the Developer Guide on how to accomplish this and we're running into an issue with logging in an app-user.I've tried n...

Is here a way with Call Manager Express to have a hunt or blast group only be active during specific time periods?For example, I'm trying to get a group of 5 phone (parallel hunt group) to all be active from 9:00 am to 12:00 pm, and outside of those ...

Our company using CUCM version 7.1, Cisco Unified Attendant Console, Cisco Unified IP Phone 6941, Cisco IP Communicator. Obviously, I'm not based on Network, but our company need to find how to directly call through website instead of using IP Phone ...

Our customer utilizes iCarol as a business application and they would like to provide a screen pop when incoming queue calls are presented to an agent based on DNIS. UCCX would need to initiate an http "get request" triggered when an agent answers th...