Solved: Cisco DNA Event driven task

1pgordo · ‎05-16-2024

I would like to be able to have DNA run commands using command runner with an issues pops up. As an example if DNA sees " Netwrok Device Interface Connectivity - EIGRP Adjacency Failure " I would like it to run some show commands and email me the output of the commands.

Ruben Cocheno · ‎05-17-2024

@1pgordo

You need to parse that and trigger the email back to you

Tag me to follow up.
Please mark it as Helpful and/or Solution Accepted if that is the case. Thanks for making Engineering easy again.
Connect with me for more on Linkedin https://www.linkedin.com/in/rubencocheno/

View solution in original post

bigevilbeard · ‎05-16-2024

Check out this repo, https://github.com/cisco-en-programmability/dnacenter_command_runner

Please mark this as helpful or solution accepted to help others
Connect with me https://bigevilbeard.github.io

Ruben Cocheno · ‎05-17-2024

@1pgordo

You need to parse that and trigger the email back to you

Tag me to follow up.
Please mark it as Helpful and/or Solution Accepted if that is the case. Thanks for making Engineering easy again.
Connect with me for more on Linkedin https://www.linkedin.com/in/rubencocheno/