Buenos dias,
Agradezco me puedan indicar como configurar un puerto con Authentication failure in 802.1x port-based, para los modelos 2960x,9300,9200, esto debido a que se necesita que el NAC que actualmente se tiene implementado en la compañía, autentique no por mac, si no por certificado.
Actualmente la configuración que se tiene es la siguiente
interface GigabitEthernet1/0/10
switchport access vlan 306
switchport mode access
switchport voice vlan 32
shutdown
authentication event fail action authorize vlan 1
authentication event server dead action authorize vlan 1
authentication event server dead action authorize voice
authentication host-mode multi-domain
authentication order mab dot1x
authentication port-control auto
authentication violation protect
mab
auto qos trust dscp
spanning-tree portfast
spanning-tree bpduguard enable
spanning-tree guard root