el 11-29-2023 05:54 PM
Hello Community,
They could share a configuration template to configure MAC authentication on the c9200-48p switch ports and a configuration format for the ISE for MAC authentication.
I thank you very much for the information mentioned.
el 12-11-2023 10:19 PM
Hi @Electronic20,
Wonder if this can help: Configuring MAC-Based Authentication on a Switch - Cisco
Cheers!
el 12-11-2023 10:25 PM
you admin the ISE or SW?
you need only the config of SW?
MHM
el 12-13-2023 12:00 PM
We would like to know how to configure both switches and ISE regarding MAC authentication.
el 12-13-2023 12:26 PM
it look steps check this video, in min22 there is how you can config SW for MAB
NOTE:- the config of SW use new model of dot1x if you use legacy please mention that I will send to you SW config
MHM
el 12-12-2023 01:51 AM
Look at the below Wired and wireless deployment : (configuration on the switch alone not get the function correctly, ISE also required configuration to achieve this)
Video help easy :
Descubra y salve sus notas favoritas. Vuelva a encontrar las respuestas de los expertos, guías paso a paso, temas recientes y mucho más.
¿Es nuevo por aquí? Empiece con estos tips. Cómo usar la comunidad Guía para nuevos miembros
Navegue y encuentre contenido personalizado de la comunidad