07-13-2021 03:22 AM
Is it possible to use a different network interface for the new GUI (trailblazer)?
I prefer not to use the default management interface, but use data 3 instead.
The prerequisites are in place:
DNS can resolve the (data 3) Interface "Hostname"
AsyccOS > HTTPS and HTTPS are enabled
Ports 8443, 6080, 6443, 4431 are open on the firewall)
...trailblazer fails to start......
I tried disabling Appliance Management > HTTPS on the actual management interface.
I've tried running trailblazerconfig enable 4431
Is there a log with additional details for troubleshooting this issue?
Solved! Go to Solution.
07-21-2021 10:52 PM
Hey Erik,
Unfortunately unless something has changed since; it's tied to the management interface.
Thanks,
Mathew
07-21-2021 10:52 PM
Hey Erik,
Unfortunately unless something has changed since; it's tied to the management interface.
Thanks,
Mathew
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide