02-18-2015 04:36 AM
Hi,
we're developing an addon to our monitoring system using values from https://<IronPort>/xml/status.
Comparing the different parameters with content of WUI "System Status" page we were able to map all but one parameter: <gauge name=”bm_utilization” current=”0” />.
Does anyone of you know which value this param represents?
Many thanks in advance!
Regards,
Marcel
Solved! Go to Solution.
02-21-2015 06:25 PM
Hi Marcel,
"bm_utilization" refers to the CPU utilisation by BrightMail scanning engine. In older days, there was an option to chose different Anti-Spam scanning engines and BrightMail was one of them.
As we now have IPAS and best of breed IMS for far better and accurate results, there is no need to run multiple/thirdparty anti-spam scanning engines. However, the option is still there.
Hope this will answer your query.
Rehan
02-21-2015 06:25 PM
Hi Marcel,
"bm_utilization" refers to the CPU utilisation by BrightMail scanning engine. In older days, there was an option to chose different Anti-Spam scanning engines and BrightMail was one of them.
As we now have IPAS and best of breed IMS for far better and accurate results, there is no need to run multiple/thirdparty anti-spam scanning engines. However, the option is still there.
Hope this will answer your query.
Rehan
02-24-2015 12:56 AM
Hi Rehan,
many thanks for your reply!
...marked the thread as solved.
Regards,
Marcel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide