RV325 Router -login

[sydney-vwalika]

Hello!

I have a challenge trying to login on a new cisco RV325, failing to open a login page on a browser, but able to ping 192.168.1.1. Kindly assist me on this am new to cisco products

[liviu.gheorghe]

Hello @sydney-vwalika ,

the default user name is cisco and the default password cisco (lowercase). If the router is new, you should get in with the default username and password.

If router was preowned, you might need to reset it. See attached link for the admin guide - https://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/rv320/administration/guide/en/rv32x_AG_en.pdf

HTH

[sydney-vwalika]

Thanks for the response, the cisco RV325 is brand new and not a preowned.

[liviu.gheorghe]

Try using Internet Explorer (version 6 and higher) for Windows, Firefox, or Safari (for Mac).

[sydney-vwalika]

I have tried different browsers without success. Thanks

[liviu.gheorghe]

Did you connect your PC to one of the LAN ports on the RV325? Did it get an IP address from 192.168.1.xxx range from the DHCP server running on the RV325?

Have you tried using HTTPS to connect to the router, https://192.168.1.1? A site security certificate message is displayed upon connection. The Cisco RV320/RV325 uses a self-signed security certificate.

[sydney-vwalika]

Yes, I connected my PC to the LAN port for the RV325 and the PC was
assigned an IP: 192.168.1.100. I was able to ping the router successfully.
So the connection is there but wondering why i can't get the login page on
the browser after entering https://192.168.1.1

[liviu.gheorghe]

Can you try with a different PC?

[sydney-vwalika]

Hi,

I tried using a different PCs, unfortunately that failed too.

Regards,

Sydney

[liviu.gheorghe]

Just to be sure, your setup is this one:

RV325------------------PC

There is nothing else connected to the RV325. Can you share the outputs of the following commands from your PC when it's connected to the LAN port of the RV325:

netstat -nr

arp -a

ipconfig

[sydney-vwalika]

[image: image.png]
[image: image.png]
[image: image.png]

Above are the outputs.

Regards,

[liviu.gheorghe]

The images didn't attach properly - it's only a placeholder.

[sydney-vwalika]

Sorry about that.

[sydney-vwalika]

[sydney-vwalika]

Hi,

Hope you will be able to view the screenshots now.

Regards