2 ISDN trunks on an E1 card with a single port.

[leoandino]

Hi.

It is technically feasible to use 2 ISDN links from the same provider on a card with 1 E1 port.???? That is, having two trunks on an E1 card with an E1 port.

If feasible, how do I set dial-peers to route the call?

Thank you.

[shelfdrilling.it]

You can create a trunk group to include voice ports for both E1s and point dialpeer to it

[Chris Deren]

Not sure I follow, but if you have only a single E1 port then only one E1 circuit can be connected to it, if you want to connect another E1 circuit you will need dual port card or separate E1 card along with sufficient PVDMs.