2801 cme download

[Joli Martinez]

I recently purchased from ebay a 2801 router that is voice capable.  I have also purchased a couple of phone.  How can I download CME on this router to play with it?  It is running 12.4

[paolo bevilacqua]

If it is running a voice or greater image, CME is already embedded in there.

Otherwise, most downloads on cisco.com require a paid support contract.

[Julio Cascante]

Try running the show telephony-service command.

If it show an output like the following it means that the GW is running an image that has the feature enabled.

CONFIG (Version=8.1)

=====================

Version 8.1

Max phoneload sccp version 17

Max dspfarm sccp version 18

Cisco Unified Communications Manager Express

For on-line documentation please see:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html

(output ommited)

If it says that the service is not enabled try enabling it by running the commands below:

conf t

telephony-service

[Joli Martinez]

I was able to enable the telephony-service, now how can I enable the web server to configure the call manager?

[Gajanan Pande · Accepted solution]

Joli,

If you meant how to enable the GUI for CME then please refer " Enabling GUI " section.

GP.

Pls rate helpful posts by clicking on stars below the post !!

[Joli Martinez]

I followed the steps to enable the GUi but the gui shows up blank.  and when I do a sh flash it just shows the current ios and not files.

[Gajanan Pande]

Ok Joli, as per your CME version please download the files from here http://www.cisco.com/cisco/software/release.html?mdfid=277641082&flowid=5337&softwareid=282786567&release=9.0&relind=AVAILABLE&rellifecycle=&reltype=latest & copy them to Flash.

Do refer the tips given here http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/admin/configuration/guide/cmegui.html#wp1073466

GP.

Pls rate helpful posts !!

[Joli Martinez]

to download this will I need a subscription or can I just purchase it? 

[Gajanan Pande]

downloading software is always charged process but if your CCO ID already has the support contract associated with it, then it's free for you. Try logging in to the page & if you are able to download it then it means you have the necessary contract associated & you can download multiple softwares as many time as you wish from CCO

GP.

Pls rate helpful posts !!

[Joli Martinez]

nope my id doesnt have access to it. but thx anyways.

[Joli Martinez]

my router is running version 12.4(13r)T.  What is the latest version of CME that my router will support?

[paolo bevilacqua · Accepted solution]

IOS 15.1(4)M, CME 8.6

Please remember to rate useful posts clicking on the stars below.

[Jaime Valencia]

If your ISR has already a CME flavor you can do all the config via CLI, you do not necessarily need the GUI.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk