02-26-2008 05:08 AM - edited 03-15-2019 09:04 AM
Hi,
I have got a 2821 router with c2800nm-entservicesk9-mz.124-10.bin IOS.
I would like to upgrade it to manage voice services and connect it to a Call Manager cluster.
Do I just need to uprade the IOS version to a Voice one or do I have also to perform an hardware upgrade ?
02-26-2008 05:15 AM
the base hardware is fine.
what exactly do you want to do with it?
do you have any voice interfaces? DSPs?
02-26-2008 05:30 AM
I want to use this router for voice.
I will have 2 E1 links, some FXS ports and first about 30 ip phones and later up to 500 ip phones.
I do not necessarely need SRST mode.
About DSP, how do I know what I need ?
Thanks for your help
02-26-2008 10:39 AM
Hi, For 2 E1 links and "some FXS ports", you need a PVDM2-64, then if you have more than 8 FXS ports , and addtional PVDM2-8 (minimum).
Hope this helps, please rate post if it does!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide