11-25-2016 01:36 AM - edited 03-17-2019 08:46 AM
Hi All,
Can anyone please help describe the meaning of this error:
Nov 25 09:27:16.230 gmt: %ILPOWER-3-CONTROLLER_ERR: Controller error, Controller number 0: accessing failed
Nov 25 09:27:16.255 gmt: %ILPOWER-3-CONTROLLER_ERR: Controller error, Controller number 1: accessing failed
Nov 25 09:27:16.255 gmt: %ILPOWER-3-CONTROLLER_ERR: Controller error, Controller number 2: accessing failed
Nov 25 09:27:16.280 gmt: %ILPOWER-3-CONTROLLER_ERR: Controller error, Controller number 3: accessing failed
Nov 25 09:27:16.280 gmt: %ILPOWER-3-CONTROLLER_ERR: Controller error, Controller number 4: accessing failed
Nov 25 09:27:16.305 gmt: %ILPOWER-3-CONTROLLER_ERR: Controller error, Controller number 5: accessing failed
Nov 25 09:27:16.305 gmt: %ILPOWER-3-CONTROLLER_ERR: Controller error, Controller number 6: accessing failed
Nov 25 09:27:16.330 gmt: %ILPOWER-3-CONTROLLER_ERR: Controller error, Controller number 7: accessing failed
Nov 25 09:27:16.330 gmt: %ILPOWER-3-CONTROLLER_ERR: Controller error, Controller number 8: accessing failed
Nov 25 09:27:16.356 gmt: %ILPOWER-3-CONTROLLER_ERR: Controller error, Controller number 9: accessing failed
Nov 25 09:27:16.356 gmt: %ILPOWER-3-CONTROLLER_ERR: Controller error, Controller number 10: accessing failed
Nov 25 09:27:16.381 gmt: %ILPOWER-3-CONTROLLER_ERR: Controller error, Controller number 11: accessing failed
I've seen this error related to a specific interface, but I'm not sure how to dig deeper on 'Controller number x'
I've done 'show controllers power inline' and 'show power inline' with output attached
Thanks!
Solved! Go to Solution.
11-25-2016 02:33 PM
Reboot the appliance and see if the error message goes away.
11-25-2016 04:50 AM
Post the complete output to the command "sh post".
11-25-2016 05:26 AM
Hi,
Here you go:
Thanks
11-25-2016 02:33 PM
Reboot the appliance and see if the error message goes away.
11-28-2016 02:46 AM
The messages aren't there after a reboot, is this a cosmetic bug?
11-28-2016 12:09 PM
I suspect this is an IOS bug and will be triggered when the uptime of the appliance reaches a certain limit.
11-29-2016 07:07 AM
Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide