cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1440
Views
5
Helpful
3
Replies
Highlighted

3945E IOS Upgrade bootstrap question

Hello,

I upgraded from c3900e-universalk9-mz.SPA.151-4.M1.bin to c3900e-universalk9-mz.SPA.152-2.T.bin, but the bootstrap is showing: Version 15.1(1r)T2.

Is this OK?

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions

3945E IOS Upgrade bootstrap question

If both images remain on flash the system will boot to the one located 'first' on the filesystem. You can use the 'boot system flash:c3900e-universalk9-mz.SPA.152-2.T.bin' config command to force a boot to the other load.

View solution in original post

3 REPLIES 3

3945E IOS Upgrade bootstrap question

If both images remain on flash the system will boot to the one located 'first' on the filesystem. You can use the 'boot system flash:c3900e-universalk9-mz.SPA.152-2.T.bin' config command to force a boot to the other load.

View solution in original post

3945E IOS Upgrade bootstrap question

Alright. Thanks!

3945E IOS Upgrade bootstrap question

Oh, also just to be sure: the bootstrap is separate from the actual IOS image running. A 'show version' will tell you that. Bootstrap is also known as ROMMON and is just there to recover the router.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards