cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
14177
Views
5
Helpful
6
Replies

7821 Registration issue

gpsriramdc
Level 4
Level 4

Hi All,

We are facing some registration issues in Cisco 7821 Phone. It took more than 30 Minutes to register in CUCM. Some of the Phones not getting registered with TFTP failed.

CUCM  version 9.1.2. We have added the necessary device package in CUCM for 7821.

Phone Active firmware:10-1-1-9

Thanks in Advance.

 

 

 

1 Accepted Solution

Accepted Solutions

 

https://supportforums.cisco.com/discussion/12187361/cisco-7821-phones

 

 

View solution in original post

6 Replies 6

Ajith Nayak
Level 1
Level 1

Dear,

 

Please try this link

http://software.cisco.com/download/release.html?mdfid=284510097&flowid=45900&softwareid=282074299&release=9.1%282.11012%29&relind=AVAILABLE&rellifecycle=&reltype=latest

Left hand side you will have latest device pack

 

Cisco Unified Communications Manager 9.1(1.21010) Device Package - Compatible UCM Version: 9.1
cmterm-devicepack9.1.1.21010-1.cop.sgn

 

 

 

 

 

Hope It should get fixed even I had the same issue if not that then try the latest.

 

Regards,

13-MAR-2013640.14 MB
 

Hi Ajith,

In our case some of the phones are registered & partial phones are having the problem. CUCM configuration , TFTP Server , Voice VLAN everything is identical as same as working phone.

But in the Phone configuration i couldn't see the UCM IP Address.

Hi,

 

Did you  try physically rebooting the phone and check what happens?

 

regds,

aman

 

https://supportforums.cisco.com/discussion/12187361/cisco-7821-phones

 

 

Thanks Nagarajan.

 

We have resolved this by upgrading CUCM to ES version for the specific bugfix.

Hi Everyone, I have the same issue, is a new clean installation with the upgrade of the dev. pack I can add all the phones but stills in register, with others phones is working fine 7965 phones and CIPC, any answer with thiss issue.

 

Best regards.

 

CG