Hello all,
Recently we installed the specified 78xx firmware and device pack to accommodate the these phones on our CUCM environment which is working fine...
However we have quite a few 2911 branch routers where we have setup phones (MGCP) and SRST etc... However, when i list ephones "show ephone ?", I noticed the 78xx phones are not listed (as below). Not sure why not?
#show ephone ?
12SP 12SP+ and 30VIP phones
6901 Cisco IP Phone 6901
6911 Cisco IP Phone 6911
6921 Cisco IP Phone 6921
6941 Cisco IP Phone 6941
6961 Cisco IP Phone 6961
7902 Cisco IP Phone 7902
7905 Cisco IP Phone 7905
7906 Cisco IP Phone 7906
7910 Cisco IP Phone 7910
7911 Cisco IP Phone 7911
7912 Cisco IP Phone 7912
7914 Cisco IP Phone 7914 14-Button Line Expansion Module
7915-12 Cisco IP Phone 7915 12-Button Line Expansion Module
7915-24 Cisco IP Phone 7915 24-Button Line Expansion Module
7916-12 Cisco IP Phone 7916 12-Button Line Expansion Module
7916-24 Cisco IP Phone 7916 24-Button Line Expansion Module
7920 Cisco IP Phone 7920
7921 Cisco IP Phone 7921
7925 Cisco IP Phone 7925
7926 Cisco IP Phone 7926
7931 Cisco IP Phone 7931
7935 Cisco IP Conference Station 7935
7936 Cisco IP Phone 7936
7937 Cisco IP Conference Station 7937
7940 Cisco IP Phone 7940
7941 Cisco IP Phone 7941
7941GE Cisco IP Phone 7941GE
7942 Cisco IP Phone 7942
7945 Cisco IP Phone 7945
7960 Cisco IP Phone 7960
7961 Cisco IP Phone 7961
7961GE Cisco IP Phone 7961GE
7962 Cisco IP Phone 7962
7965 Cisco IP Phone 7965
7970 Cisco IP Phone 7970
7971 Cisco IP Phone 7971
7975 Cisco IP Phone 7975
7985 Cisco IP Phone 7985
CIPC Cisco IP Communicator
H.H.H mac address
IP-STE SCCP IP STE
anl SCCP Gateway (AN)
ata ATA phone emulation for analog phone
attempted-registrations Attempted ephone list
bri SCCP Gateway (BR)
cfa registered ephones with call-forward-all set
detail with detailed info
dn Dn with tag assigned
dnd registered ephones with do-not-disturb set
login phone login status
moh Information of all moh groups
offhook Offhook phone status
overlay registered ephones with overlay DNs
phone-load Ephone phoneload information
registered Registered ephone status
remote non-local phones (with no arp entry)
ringing Ringing phone status
sockets Active ephone sockets
summary Summary of all ephone
tapiclients Ephone status of tapi client
telephone-number Telephone number assigned
unregistered Unregistered ephone status
vgc-phone vg248 phone emulation for analog phone
| Output modifiers
<cr>
Is there something else I have to do on a router perspective for these phones and SRST?
Any help much appreciated!
Cheers!