09-15-2010 04:33 AM - edited 03-16-2019 12:47 AM
Dear friend,
I have to install an expansion module 7915 with CP7962G= but I think that I need a firmware because after connecting 7915 in CP7962, I have all button in orange. Does someone have the correct link to download the firmware B015-1-0-2.SBN because I don't see it in my CME 7.0 firmware.
I count on your help.
Regards !
09-15-2010 05:29 AM
Hi Djibril,
Here is the link
Tools & Resources> Download Software> Voice and Unified Communications > IP Phones> 7900 Series> Cisco Unified IP Phone Expansion Module 7915 > Skinny Client Control Protocol (SCCP) Software > Cisco Unified IP Phone Expansion Module 7915 > Skinny Client Control Protocol (SCCP) Software > 1.0(4)
http://www.cisco.com/cisco/psn/web/download/index.html
Don't forget to also check the Firmware on the 7962, I believe it needs to be @ 8.3(5) or later.
Cheers!
Rob
09-15-2010 05:35 AM
Hi Rob,
Thanks for your return. However, my CCO profile can't permit me to download the firmware. If you got it, can you link me that or send me that by Email.
Regards !
09-15-2010 06:23 AM
Hi Djibril,
I'm sorry my friend, but I cannot share this Firmware with you
due to Legal and ethical restrictions
You will need to acquire a service contract that gives you rights to
download from CCO.
Cheers!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide