07-19-2011 07:35 AM - edited 03-16-2019 06:01 AM
Is there a way to change the radio settings on multiple 7925Gs? I have over 200 to change from b/g to a only.
I could track each phone down and change it by hand, but I really don't have a few days to kill.
I tried downloading the "all details" file, but those configs only show which wlan profile to use.
Any ideas?
ven
07-19-2011 10:46 AM
You can use USB to change the settings. That is what I did when I mass deployed about 250 7925's.
07-20-2011 12:26 PM
You can get the ip address of each phone from the CUCM, connect to each one individually through the browser and change it from there remotely. It really is not a "mass" change but it beats physically tracking down each one .
p.s. You should configure first full web access and assign a username and password in the phone's CUCM page in order to log in remotely and make changes.
07-21-2011 08:18 AM
I went ahead and tracked them all down.
Changing to 802.11a only wasn't a terrible chore. I managed to configure one in each hand. It took about 10 seconds per pair. Took the better part of the morning, but it got done.
Thanks for the suggestions!
Ven
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide