8800 expansion module - column modes

[Ben Fuller]

Hi,

Does anyone know how I change the expansion module mode from 2 columns to 1 column on an 8800 expansion module?

Ciscos documentation on the configuration is poor / non-existant

Thanks in advance

[Venkatesh Perumal]

there is a parameter in phone configuration page "One Column Display for KEM" enable it to get one column display.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8811_8841_8851_8861/10_5/english/adminguide/P881_BK_C0632068_00_cisco-ip-phone-8811-8841/cisco_ip_phone_key_expansion_module.pdf

regards,

-Do rate helpful posts

[Ben Fuller]

Thank you! Super helpful.

One other question......ever since we went to the new firmware the font is bigger.  Is there a way to adjust the font size on the phones?

[Venkatesh Perumal · Accepted solution]

You can set it from phone settings-->applications

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8800-series/english/userguide/P881_BK_CC6C5F2C_00_cisco-ip-phone-8800_series/P881_BK_CC6C5F2C_00_cisco-ip-phone-8811-8841_chapter_01000.html#P881_TK_CF1AB5BE_00

regards,

-Do rate helpful posts

[Ben Fuller]

Extremely helpful.

Really appreciate it, thanks