09-08-2008 11:51 AM - edited 03-15-2019 01:07 PM
I have a customer that uses the 911 service fairly often and when they are on the line for more than a 4-6 minutes, the calls terminate unexpectedly. The customer is using CM 3.3 with an MGCP controlled CAS T1 in the gateway. Any troubleshooting tips would be appreciated.
09-08-2008 01:20 PM
Only 911 calls via this circuit?
Can we get from GW
debug mgcp packet
debug vpm signal
From CUCM side:
SDI and SDL traces
Calling, called and timestamps.
Thanks
09-09-2008 01:02 PM
I will post the debugs and the CCM trace. Phone number in question is 36098, call was made to 911, start time is 9:58 at approx. 40 - 50 seconds. MAC Address of phone is SEP001121B52CDD. The timing between call amanger and the gateway are off by 1 minute 37 seconds. First I saw and we will definitely fix. But for log purposes, it's a nightmare on this. Was unable to pull SDL trace. Went too late to retrieve. Sorry, about the size of the log. Thanks for your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide