Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have CUCM 6.1.1.3102-3. There is no busy tone or engage tone when calling between internal IP Phones and externally. The call just disconnect. Is this a bug?
question on deployingata 186. Should it be placed on the Data vlan or voice vlan? Thanks,cempuerto
For about 3 months, we have been experiencing a rash of 911 calls when our users insist they did not dial 911. We use 9 as our access code for an outside line - have been using it for ages. All of a sudden, it has become a problem. I am sure that in ...
Hi there,I was wondering if someone got a document about the path to upgrade the OS. My OS is Windows 2000.2.6. Any help will be highly appreciated.Thanks
CDR Insert Service will not start on pub. Event log says invalid pswd/login. Changed password of CDR weg gui admin. The Windows service, starts as another user, which I changed the password to. I cannot reinstall CDR, as there seems to be no docum...
Guys just a quick question. will this be able to run or rather be supported for virtualized environments? im hearing a few things and just wanted to be clear. any documenation on this fact will be greatly apperciated.thanks
hii have a cisco unity to be installed on 7825 MCS IBM with dual NICs, i wantto ask about how to configue these dual NICs:is NIC teammig supported in this platform, if yes how to configue it?if no, is the only choice for the 2 NICs to be active-passi...
I have a Cm Cluster having one Pub and one Sub.It was working smooth last one year.last 2-3 weeks it started making problems without changing anything in the systems.The problem is All phones will go to registering state untill I restart the call man...
HIIntermittent noise on our 3xbri trunkgroup so bad that our Zurich user's cannot use the phones. Sometimes it is not intermittent and applies to all bri calls. CM4.2.3sr1 with MGCP GW 12.4.15TBelow is relevant configs of one of the bri: no network-...
hi all,i want to check the call manager 4 has no issue and running fine without alarm and errors, how i can do this?2nd thing i want to backup the call manager 4 , how 2 do this ?
When I connect the 7937 to the data port on the floor, will not turn on at all.If I connected to my 3750 port it comes on instantly.What can it be wrong?Thanks.
we have 2811 with call manager express someone help us to configure the e1 card for pri ISDN incoming and outgoing voice calls...
Hi all,I have one router 2811 with 1 E1 voice card and 2 PVDM2-8. When I configure E1 controller with command "ds0-group 1 timeslot 1-15 type r2-digital r2-comp ani" I receive alarm inform that the router only has DSP resource for 12 timeslot.Is it p...
We are going to be brining on a remote site that will have CME/SRST running. They will be connnect to a CUCM 5 clusters. I have read different post were poeple are using MGCP and some H323. I believe I saw a document that Cisco was recommending h3...
Hi I'm new to the IP telephony world we have a current Call Manager 6.1.2.1000. I have an employee that does not have an office. Can I create a DN and have the rest of the office staff call that number to leave messages and have the employee check th...
