AA for branch site . unity as primary , tcl as backup

[aasaadsavola]

I am trying to configure Branch router for the customer to  have :

1) AA from unity connection as Primary

2|) User Local TCL  script AA as backup in case of primary failure.

when i try to call the main number , the Local TCL AA ALWAYS start  even if the WAN to Unity connection in HQ is up.

main number : 2687000

AA Pilot number : 8067000  in untiy and TCL

please the attached file for full config

your support 

[Aseem Anand]

Hi,

You need to make sure that the incoming dial-peer which gets matched does not contain the service command. For example you can create a new dial-peer with incoming called number set to exactly match the number received from Telco and specify the service on the outgoing dial-peer 

dial-peer voice 71 pots
translation-profile incoming DNIS
incoming called-number 8067000
direct-inward-dial
port 0/1/0:23

Aseem

[aasaadsavola]

Thanks for your reply.

I want to Make Unity AA  as primary   and TCL Script in Local GW as Backup.

so you said apply service auto attend tcl  on outgoing dial-peer 

what is destination pattern  ? Local Voice Gateway ? 

can you clarify more.?