02-21-2013 10:06 PM - edited 03-16-2019 03:52 PM
Dear All,
I am trying to configure CME 4.1 on 1760-v router for my home purpose. you can find attach sh run, sh inventory and incomming call-log on fxo port, which i got from "debug vpm all" and "terminal monitor" commnads. call is coming to fxo port and moved to aap.tcl script ( inside the flash with all audio.au files), and then sometimes its disconnected immediately, and sometimes keep connected for 10 to 12 sec and then disconnected.
Any idea, what going wrong? is it codec issue? PVDM?
sh version is also attached
ITCS#terminal moni
ITCS#
ITCS#
ITCS#
ITCS#debug vpm all
All Voice Port Module debugging is enabled
Note: DSP message debugging is not part of this command.
Use debug vpm dsp to enable it
ITCS#
*Mar 3 22:46:16.062: htsp_process_event: [2/1, FXOLS_ONHOOK, E_DSP_SIG_0000]fxo
ls_onhook_ringing
*Mar 3 22:46:16.062: TGRM: reg_invoke_tgrm_call_update(0, 2, 1, 65535, 1, TGRM_
CALL_PENDING, TGRM_CALL_VOICE, TGRM_DIRECTION_IN)
*Mar 3 22:46:16.062: htsp_timer - 125 msec
*Mar 3 22:46:16.082: htsp_process_event: [2/0, FXOLS_ONHOOK, E_DSP_SIG_0000]fxo
ls_onhook_ringing
*Mar 3 22:46:16.082: TGRM: reg_invoke_tgrm_call_update(0, 2, 0, 65535, 1, TGRM_
CALL_PENDING, TGRM_CALL_VOICE, TGRM_DIRECTION_IN)
*Mar 3 22:46:16.086: htsp_timer - 125 msec
*Mar 3 22:46:16.174: htsp_process_event: [2/1, FXOLS_WAIT_RING_MIN, E_DSP_SIG_0
100]fxols_ringing_disc
*Mar 3 22:46:16.174: htsp_timer_stop3
*Mar 3 22:46:16.174: htsp_timer_stop
*Mar 3 22:46:16.174: TGRM: reg_invoke_tgrm_call_update(0, 2, 1, 65535, 1, TGRM_
CALL_IDLE, TGRM_CALL_VOICE, TGRM_DIRECTION_IN)
*Mar 3 22:46:16.194: htsp_process_event: [2/0, FXOLS_WAIT_RING_MIN, E_DSP_SIG_0
100]fxols_ringing_disc
*Mar 3 22:46:16.194: htsp_timer_stop3
*Mar 3 22:46:16.194: htsp_timer_stop
*Mar 3 22:46:16.194: TGRM: reg_invoke_tgrm_call_update(0, 2, 0, 65535, 1, TGRM_
CALL_IDLE, TGRM_CALL_VOICE, TGRM_DIRECTION_IN)
ITCS#
ITCS#sh version
Cisco IOS Software, C1700 Software (C1700-ADVENTERPRISEK9-M), Version 12.4(15)T
RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Mon 25-Jun-07 18:39 by prod_rel_team
ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
ITCS uptime is 1 day, 10 hours, 49 minutes
System returned to ROM by reload
System image file is "flash:c1700-adventerprisek9-mz.124-15.T.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco 1760 (MPC860P) processor (revision 0x500) with 123157K/7915K bytes of mem
ry.
Processor board ID FOC08490ZUQ (3780485029), with hardware revision 0000
MPC860P processor: part number 5, mask 2
1 FastEthernet interface
2 Serial(sync/async) interfaces
1 ISDN Basic Rate interface
2 Voice FXO interfaces
32K bytes of NVRAM.
49152K bytes of processor board System flash (Read/Write)
Configuration register is 0x3922
Thanks
Waqas
02-25-2013 01:24 PM
Hi,
if you use it as a direct line without AA, is it working ?
check if your transcoder if it is registered or not ?
HTH
Anas
please rate if it is helpful
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide