Hello all
I have a question about fxo and fxs .
My lab is very simple but have some problems.
################################################
analog phone ==> R1-Voice-GW (FXO port 0/1/0)<=====> (FXS port 0/2/1)R2-PBX ====> analog phone
My config setting as the below.
R1-Voice-GW
##phone number 1001 / FXS port 0/2/0
dial-peer voice 1001 pots
destination-pattern 1001
port 0/2/0
!
dial-peer voice 2001 pots
destination-pattern 2001
no digit-strip
port 0/1/0
R2-PBX
##phone number 2001 /FXS port 0/2/0
dial-peer voice 2001 pots
destination-pattern 2001
port 0/2/0
!
dial-peer voice 1001 pots
destination-pattern 1001
port 0/2/1
###############################
Question : I can call from 1001 to 2001 but can't call from 2001 to 1001 . Do I need to add any config on R1 or R2 ?
