cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
489
Views
0
Helpful
3
Replies
ulambaday
Beginner

Allow only certain range of incoming calls to an analog phone CUCM 8.6.2

Hi All,

 I have a request from customer for an analog phone

1. Able to make outgoing call to only to one number(this can be achieved)

2. Allow only certain range of incoming calls to this analog phone. 

 

CUCM 8.6.2

 

Any help is much appreciated

 

Thanks!

 

1 ACCEPTED SOLUTION

Accepted Solutions
Chris Deren
Hall of Fame Master

For item #2 the only way to achieve this is to put the analog device on dedicated partition and add this partition only to CSS of devices that should have access to it.

View solution in original post

3 REPLIES 3
Chris Deren
Hall of Fame Master

For item #2 the only way to achieve this is to put the analog device on dedicated partition and add this partition only to CSS of devices that should have access to it.

Chris,

Thanks for your reply.

Can you please give some more information.

I was thinking that we should do this on gateway level by matching the called party and apply translation rules to allow certain range of calls.

 

 

Chris,

 I am able to make it work through TP, Partitions and CSS.

 Thanks again.

 

Create
Recognize Your Peers
Content for Community-Ad