Analog phone connected to FXS, cannot transfer

[tony.hanson]

I have a customer who has a Analog phone shared with her IP Phone and when she answers the Analog phone she was wondering how to transfer that call to another extension. So I was researching this and could not find anything. They have a CCM 6.x I was wondering if this was possible or not.

[Brandon Buffin]

I'm assuming the FXS port is MGCP controlled? If so, you should be able to use hookflash to transfer the call.

http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a0080094584.shtml

Brandon

[tony.hanson]

Thanks, I think the link you sent me is wrong, it's link for :"Converting a Cisco 7940/7960 CallManager Phone to a SIP Phone and the Reverse Process"

I don't see anything about hookflash transfer.

[Brandon Buffin]

Sorry. Here is the correct link.

http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a00801f3b42.shtml

Brandon