01-26-2009 08:16 AM - edited 03-15-2019 03:46 PM
Connected inhouse PA system to ATA386 box
to provide analog line. Current system is
CCM 3.3(2). Connection works.
Problem is that analog line drops after about 10 seconds. It appears to be timing out. If so, need to increase this
timeout time, does anyone know how to do
this?
Thanks
01-30-2009 08:55 AM
What firmware is the ATA running on? Is it using h323 or sip? Are you having problems with outbound calls only or inbound as well?
01-30-2009 12:22 PM
It uses H323.
01-30-2009 12:21 PM
ata
Version: v3.0.0 atasccp (Build 031210A)
ProductId: ATA186I1
Features: 0x00000000
HardwareVersion: 0x0006 0x0000
It is strictly a virtual number in the system. It's only connection is to a
PA system in a production area. No calls coming in.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide