04-27-2009 03:34 PM - edited 03-15-2019 05:41 PM
Interested to know if anybody is running 7910G with CUCM 7.0. Any issues? 7910 shows compatible with CUCM 7.0 and i wanted to know if anyone is actually using them with 7.0 and if you are running into any challenges as i am trying to squeeze more ROI out of my old phones.
04-27-2009 10:31 PM
Unfortunatly i just have them running in my lab, sccp version is compatible,
havent found any issues so far in bug tool kit.
05-06-2009 12:11 PM
Thanks for your response currently i am doing a migration from ccm 3.2 to ucm 7.0 and the customer has a bunch of 7910! I checked out the 7910 matrix and 7.0 was not listed, but i check the default phone loads on 7.0 and there is a sccp load for it. So i labbed it and it seems to work well with other sccp and sip phones. i just wanted to know if anyone seen issues in productions. I am trying to detach the ccm migration from the phone upgrade with a really paranoid customer.
11-24-2009 07:04 AM
Wondering if anyone has gone production with the 7910's on CUCM 7.x more specifically
would like to see 7.1.
Please let me know if anyone out there has done production with 7910 and how things are going.
Thanks,
Paul.
11-24-2009 07:10 AM
Because there was no way to replace all our 7910 before we finished our 3.2 to 7.0 upgrades so for about 3 weeks we had 7910s in productions running on 7.0. There was no reported issues.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide