Apply Phone Password on CP 7821 Phone

[J Baek]

Dear Guy 

I'm a new in cisco phone.

Is there any way to set up the password on CP 7821?

it is not activated on CUCM(Device > Device Settings > Common Phone Profile).

Please let me know how to resolve it.

[Manish Gogna]

Hi Baek,

You will need to apply it on the Common phone profile only, there is no other option apart from using extension mobility

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7811-7821-7841-7861/10-1/english/adminguide/PA2D_BK_7479E876_00_7811-7821-7841-7861-ag-cucm-1031/PA2D_BK_7479E876_00_7811-7821-7841-7861-ag-cucm-1031_chapter_011.html#CUIP_TK_AEA44E63_00

Apply Phone Password

You can apply a password to the phone so that no changes can be made to the administrative options on the phone without password entry on the Administrator Settings phone screen.

Procedure

---

Step 1	In Cisco Unified Communications Manager Administration, navigate to the Common Phone Profile Configuration window using Device > Device Settings > Common Phone Profile.
Step 2	Enter a password in the Local Phone Unlock Password option.
Step 3	Apply the password to the common phone profile that the phone uses.

[J Baek]

Dear Manish Gogna

Thank you very much to reply.

BTW how do i activate the common phone profile? do i have to purchase the another license or is there any way to activate the common phone profile?

Please advice to me and attached the screenshot.

RDS,

Jay

[Manish Gogna]

No extra license is needed for this feature. If you have access to cucm admin page then follow steps 1-3 of my earlier email. Go to Device > Device Settings > Common Phone Profile > Click on Add New

Create a new profile , give it a name and a password in the Local Phone Unlock Password field. Then go to the 7821 phone and select this profile from the Common Phone Profile dropdown field on the 7821 phone config page and reset the phone.

Softkey Template

Common Phone Profile

HTH

Manish

[J Baek]

oh i tested it. but it's my misunderstanding. 

Actually my question is is it possible to apply password the phone on calling out?

[Manish Gogna]

Yes, please read this doc to configure FAC and configure accordingly, its explained in detail with screenshots

http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-callmanager/81541-fac-config-ex.html

Manish

[Deepak Rawat]

http://docwiki.cisco.com/wiki/Endpoints_FAQ#Can_I_lock_my_phone.2C_or_require_a_PIN_before_making_calls.3F.3F