08-25-2017 04:06 PM - edited 03-17-2019 11:04 AM
Hi All,
Need suggestions on possibilities of Automating Cisco phone (Add\Remove) process.
To give a background, we have a Centralized deployment of CUCM with 1000+ Branch sites. We have a dedicated Local tech at each of these sites who works as hands\Feeds during troubleshooting.
Our Goal :- As these techs don't have access to CUCM, they depend on us for All New phone configuration, we are looking for a way to Automate this process so they don't have to call us instead do a Plug & Play with new phones (or) replacement phones.
CUCM Version Currently in Use :- CUCM 10.5
What are the possible ways we could do this ? I have looked into the New Self Proviosing Feature on (CUCM 10.5) but not sure how useful it would be as we have multiple location with dedicated Device pool, CSS (Each site again has diffrent types of Permission based CSS), Partition etc...
Please suggest...
Solved! Go to Solution.
08-25-2017 05:57 PM
There are few options, you would need to look into PCP, or 3rd party products:
http://www.unifiedfx.com/migrationfx/
https://www.akkadianlabs.com/apme/
Or building your own interface leveraging AXL.
Self-Provisioning provides a single configuration, it does not work with settings per site, you could use it to establish some baseline config, and then adjust as necessary.
08-25-2017 05:57 PM
There are few options, you would need to look into PCP, or 3rd party products:
http://www.unifiedfx.com/migrationfx/
https://www.akkadianlabs.com/apme/
Or building your own interface leveraging AXL.
Self-Provisioning provides a single configuration, it does not work with settings per site, you could use it to establish some baseline config, and then adjust as necessary.
08-26-2017 11:07 AM
Thanks for the Prompt response Jamie. I will explore those Options.
08-28-2017 10:44 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide