03-16-2009 06:42 AM - edited 03-15-2019 04:52 PM
Do you know the option for a successfull backup from a ccm v3.3?
Solved! Go to Solution.
03-16-2009 06:48 AM
You can use BARS.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bars/3_x/b_r332.html
Hope this helps.
Brandon
03-16-2009 08:15 AM
There is no direct upgrade path from 3.3 to 6.x. You would need to get to at least 4.1(3). See the compatibility matrix below.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp40074
Also, see the install/upgrade guide for the version that you want to upgrade to here:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_installation_guides_list.html
Hope this helps.
Brandon
03-16-2009 06:48 AM
You can use BARS.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bars/3_x/b_r332.html
Hope this helps.
Brandon
03-16-2009 08:06 AM
Very usefull, do you know the steps for upgrading the ccm 3.3 to cucm 6.2?
03-16-2009 08:15 AM
There is no direct upgrade path from 3.3 to 6.x. You would need to get to at least 4.1(3). See the compatibility matrix below.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp40074
Also, see the install/upgrade guide for the version that you want to upgrade to here:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_installation_guides_list.html
Hope this helps.
Brandon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide