09-10-2015 08:01 AM - edited 03-17-2019 04:16 AM
Hello all,
I am wondering if it is the same way to block incoming faxes as incoming calls, and the reason? Your input is appreciated.
I already blocked the incoming calls successfully, by implementing translation rule and update the dial-peer as below.
https://supportforums.cisco.com/discussion/12598916/block-specific-incoming-calls-h323-gateway
Regards,
Master001
09-10-2015 08:34 AM
Hi,
You can block fax calls in similar way to voice calls on analog trunks. FYI, fax calls are initially received as voice calls then convert to fax after detecting the fax signal.
09-10-2015 09:19 AM
I see... " fax calls are initially received as voice calls then convert to fax after detecting the fax signal" , any document or link you could provide regarding this Mohammed? Thank you.
Master001
09-10-2015 09:51 AM
http://www.cisco.com/c/en/us/td/docs/ios/voice/monitor/configuration/guide/12_4/vt_12_4_book/vt_fax_trouble.html
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: