cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

AMA-CUCM Troubleshooting: Best Practices for Reading Trace Files

716
Views
5
Helpful
1
Replies
Beginner

BRI config with CME 4.3

Hi ,

i have configured FXO interface with CME for PSTN outbound and inbound calls.

How to configure BRI for outbound calls. can anyone provide me a sample config.

regards

1 REPLY 1
Beginner

Re: BRI config with CME 4.3

Hi,

Please see some sample configs below:

interface BRI0/1/0

no ip address

isdn switch-type basic-net3

isdn not-end-to-end 56

isdn point-to-point-setup

isdn incoming-voice voice

isdn sending-complete

isdn static-tei 0

dial-peer voice 1 pots

description ** BRI pots dial-peer **

translation-profile incoming INCOMING

preference 1

destination-pattern 9T

incoming called-number .

direct-inward-dial

port 0/1/0

!

Hope this will help.

Regards,

Chandrasen

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards