Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Dear Networkers, I am facing a peculiar issue while trying to generate the user / extension based report from CDR. After i select the extension and i say generate report, its throwing me 'error code 10012' Database Error. Contact System Administrator...
Hi Where I can to do download the applications XML for 7940, 7960?Thank you
I have two 7920's at a remote location. They have the same firmware and appear to be configured identically. However, when side-by-side, one gets strong signals from both access points (relative to distance) but the other gets no signal unless it i...
Hi,I am using CCM 5.1. Since last day, my IP Phones registered with Publisher aand then subcriber. I changed the CCM group with subscriber as priority and all phones are in 1 single deivce pool.After changing the CCM group, I am still seeing few phon...
I have 8.2.2sr2s on 7970 touch screen where sometimes the calls disappear and comes back on screen.Was thinking of upgrade the phone load.Is it supported on UC520?Pls let me know.
Hi pro, network topology: IP Phone==CCM5.1==GW(FXO)==PSTNI've configured FXO port on my 2811 router. If I configure GW using MGCP, it works fine (IP phone stop ringing when PSTN phone hang up), but doesnt work with H323 gateway :(When I make a call f...
Is there a key combination to put the phone to sleep any time? Thanks
Since IPC via CDP will announce itself, is the command "mls qos trust device cisco-phone" on a 2950 enough for it to trust the DSCP from the PC attached? Will it then trust the DSCP value for all traffic or just voice / signaling traffic?I guess I...
how we can create a dial plan pointing from ccme to ccm , how the digit discarding need to be discard before i send the digit to ccm.waiting for your valubale reply.
Dear all,Is there any problem when pinging the CUCM 5.1 even from Local LAN.I got the following output while trying to ping the CUCM from our core switch:MOA-MC-CORE2#ping 10.21.0.3 repeat 100Type escape sequence to abort.Sending 100, 100-byte ICMP E...
Hi Everybody knows what is missing?I made a call direct from ccm to vm(cue) on ccme and work perfect indeed using trancoder. and I have probed the trasncoding between to sides adding transcoder on ccme and work fine.
Hi. I've got an annoying issue with my 7921. When I GPickup, the speaker automatically turns on. How do I stop this from happening?
Does anyone know if there is a way to have different phones use different ringlists? I want to add new ring tones but not have them available to everyone.Thanks,Glenn
I have no idea where to go with this one but here goes...My call manager "seems" to be making calls outbound all by itself but only to two locations, Colorado and Wyoming. Here is how it goes, our front desk phone rings, it is answered and connected...
Hi there,Is there any link to How-to to install CUCM 6.1 with USB (un-attendend)? Thanks.
