cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1215
Views
0
Helpful
1
Replies

Call flow IP phone and PSTN

Arjun Kamble
Level 1
Level 1

Hi All,

Can somebody elaborate the call flow of outgoing call from Ip phone to PSTN and incoming call from PSTN to ip phone. Please provide me information as step by step.

1] Outgoing: IP phone to PSTN

2] Outgoing: IP phone to IP phone

3] Incoming: PSTN to IP phone

4] Incoming: IP phone to IP phone

Thank you,

Arjun Kamble

1 Reply 1

Pal, Yash
Level 1
Level 1

It completely depends on what VOIP environment do you have, if you have a Cisco VOIP (CUCM)environment then please find the flow below as per the given scenario:-

 

1) For outbound PSTN call from Cisco IP phone:- Cisco IP phone/DN->CUCM->H.323/MGCP/SIP Gateway->PSTN

2) For Inbound to Cisco IP phone from PSTN number:- PSTN->Telco/Mobile Operator->H.323/MGCP/SIP Gateway->CUCM->Cisco IP phone/DN

3) For Outbound IP phone to IP phone/VOIP call-> Cisco IP phone/DN-CUCM->Cisco IP phone/DN

4) For Inbound IP phone to IP phone/VOIP call-> Cisco IP phone/DN-CUCM->Cisco IP phone/DN

 

Above explained flows are just basic overview that how the calls flow in different scenarios however there are lots of technical stuffs involved behind these call flows.

 

I hope it helps you.

 

Regards
Yash pal
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: