Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
FXO can't call in. When i debug vpm signal I get this "On_hook line reversal detected possibily due to crossed cable?Can anyone help how to solve this?
Hi, we have two server in Cluster, HA not setup. In Presence Redundancy Groups are both servers configured. When I add in AD new user and sync LDAP Dir. the user will apper in the Subsriber and I have to manually assign him to IMP publisher. I checke...
Hi All,Just wondering if i can get some help. I have the following scenrio need some suggetsions or help on how to proceed.The customer has basically 6 offices HEAD OFFICE -- 500 UsersRemote Site A --60 UsersRemote Site B --- 50 UsersRemote Site C -...
Hello,I need some help with configuring the B-ACD with cisco cme 8.6 currently I dont have any pstn line all I have is 2801 router with CME 8.6 Installed with some phones up and running.Phones Scenrio :when ever some one call 600 It should go to IVR ...
We are attempting to configure 4431 ISR routers with 16 T1s. These T1s connect to a DACs system that beaks out the DS1s into individual DS0s and sends the specific DS0s to remote locations. Is it possible to configure the T1s as MGCP in CUCM and ...
Hi, I have ISR 4331 router with voice IOS with FXO card I Need to install Call manager express for 60(6921-10,7942-2,7962+7915-1,7975-1,7965-1,7945-1,6901-1 phones. And i need to have welcome message for my company. Could anyone advice what licenses ...
HI All Is this possible to test SRST with the following ways ? Also please tell me if there is any difference in testing normal SRST & SIP SRST. Method 1 For Example my CCM IP is 10.10.1.24Add the following route:ip route 10.10.0.0 255.255.255.0 n...
i have aproblem with my Pub and Subtwo server appear below message and can't login to PLM
Hello,Directory gets missing from the phones across the site.Phones displayed HTTP Error [500]!.Directory worked fine yesterday but stopped working all of the sudden. No changes made on CCME.IP Telephony and Phones, Unified CommunicationsSystem imag...
Hello, We have recently installed CUCM 12.5. When a user now goes into the Corporate Directory on the phones (8851's) they see "Offline" next to peoples names. I thought it was to do with "Presence" and if they were logged into Jabber this would chan...
Is it possible to obtain spare parts for Cisco handsets ? We'd like to be able to purchase replacement hook-switch assemblies for the 794x/796x phones. (See attached picture for the part we're after)GTG
I have cisco voip phone , model number CP-7841 , with cisco manager express.the phone can call only internal extensions, but I can't call landline numbers ?thank you
Hello People,We recently upgraded 78xx phones to latest firmware and did not face any issue so far. We performed several tests and looks okay. Phones are not getting disconnect, users did not report issue. Have you upgraded 88xx models to latest fir...
Hi AllAt first, I never use Cisco ip phone ever...I just bought 2 used Cisco ip phone and already upgrade FW to ver. 9-4-2-SR3.When I try to setting some configurations(some like disable LLDP, setting LLDP Power priority or QoS setting...),it just ca...
Hi, I am trying to disable video capabilities for IP phone 8945s in call manager. However, it gets triggered somehow and shows device video capabilities enabled. Has anyone come across this issue? It's a tricky situation because some 8945s in cluster...
