cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
473
Views
0
Helpful
2
Replies

Call Setup problems -- and fingerpointing issues ;-)

joequigley
Level 1
Level 1

I just started with a new company and inherited an issue where call setup is not working to a particular location. As soon as the called party answers, the call drops.

Here's the logical diagram:

Calls terminate successfully this way --

Site A >> PRI >> PSTN >> PRI >> Site B

Call setup fails this way --

Site A >> PRI >> PSTN >> PRI >> Site B >> ICT >> Site C

So basically I can complete calls to Site B, but not to site C -- call setup fails.

I only have insight from Site A to the PSTN, and the admin at Site B says the issue is on my side. This looks like a resource issue on their side to me. I am not skilled enough to find damning evidence in trace logs but did gather both a ccapi inout and Q.931 debug on the gateway -- MGCP signaling.

Please offer up any assistance. Thank you!

2 Replies 2

joequigley
Level 1
Level 1

I guess I should have added the attachment on the initial post eh?

Can you post the running config of your router?