03-10-2016 08:41 AM - edited 03-17-2019 06:11 AM
Hi guys; I could help with the following:
For calls to the PSTN, dial the prefix 9xxxxxxx. the operator should receive only 7 digits.
I need to delete the prefix 9 when the call leaves the CUCM toward the operator. I see exisite the option to do so in the "Called Party Transformations" but does not appear enabled, you need to do to enable this option ??
Solved! Go to Solution.
03-10-2016 08:51 AM
Hi,
You need to configure pattern with dot like 9.xxxxxxx and now if you set discard digit to PreDot, all/any digits before dot will get stripped off.
- Vivek
03-10-2016 08:51 AM
Hi,
You need to configure pattern with dot like 9.xxxxxxx and now if you set discard digit to PreDot, all/any digits before dot will get stripped off.
- Vivek
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide