12-20-2011 01:45 PM - edited 03-16-2019 08:38 AM
Can one manipulate the Caller ID for ingress calls from PSTN, either on the GW or Callmanager? I think you can't but wanted to confirm with the gurus!
Solved! Go to Solution.
12-20-2011 03:06 PM
You can manipulate the caller id ingress with translation rule.
12-20-2011 10:24 PM
You can change it on the gateway if it's h323
Or on cucm either
In the gateway setting using transformation mask
Or
Using a translation pattern as well
Hope this help
If helpful rate
Sent from Cisco Technical Support iPhone App
12-20-2011 03:06 PM
You can manipulate the caller id ingress with translation rule.
12-20-2011 10:24 PM
You can change it on the gateway if it's h323
Or on cucm either
In the gateway setting using transformation mask
Or
Using a translation pattern as well
Hope this help
If helpful rate
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: