03-07-2008 10:41 AM - edited 03-15-2019 09:18 AM
We have CCM 6.0.1
I have a phone that displays caller id from an outside call. I have another phone that does not display caller id fromt eh outside. Looking at how the phones are set up they look the same. Where do I need to look in case I missed something?
03-07-2008 02:58 PM
what are the phone models?
what do you see on the phone that does not display the caller id?
is the routing the same in both cases?
or do you reach one thru a translation pattern?
javalenc
03-11-2008 09:15 AM
We use 7960, 7911, 7912.
We are notified via e-mail that a Voice Message is left and sometimes the external number shows up and sometimes it does not.
All the phones are programmed the same.
03-11-2008 09:32 AM
you would need to gather traces and some debugs on the GW to verify is the issue is that the phone number is really sent but not presented or if the calling party info is not delivered to the GW since you can have the option to hide your phone number and that might be the case for the guys that are calling you for which you do not see their calling party information
HTH
javalenc
if this helps, please rate
03-11-2008 09:34 AM
Is there a setting on each device the determines this?
03-11-2008 09:37 AM
on the calling side =), nothing on yours unless you have something on the gateway if it's H323 to do this and block or change this
javalenc
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide