Can't register CIPC onto CME

[happyatuni]

Dear NetPro gurus,

On my new client site, i have tried everything but couldn't register CIPC onto the brand new CME router. 

My laptop MAC Address = SEP5C260A5703F8

The relevant config are:-

ephone  131

mac-address 5C26.0A57.03F8

type CIPC

button  1:501

!

ephone-dn  501
number 82428
label Hunt Lee CIPC / 82828
description Hunt Lee - Dubbo
corlist incoming CSS-IDD

!

It just stuck on the message 'Registering', but it never managed to get any DN from CME.

I have attached the TFTP debugs as well as the CME router config.  My test laptop IP is - 10.65.22.25

Would greatly appreciated if anyone can shed some light on this.

Cheers,

Hunt

[Tagir Temirgaliyev]

did you configured this ip 10.69.49.254 in cipc as tftp address?

probably

conf t

telephony-s

create-cn

[jisrael321]

Also try this

Conf t

telephony-s

no create-cn

cnf-file perphone

create-cn

[Nadeem Ahmed]

hello Lee,

Looking at the debug that you have collected i see below errors

2013 10:02:28.007 UTC: TFTP: Looking for SEP64A0E7F6991C.cnf.xml

Mar  7 2013 10:02:28.007 UTC: TFTP: Sending error 1 No such file

Mar  7 2013 10:02:28.347 UTC: TFTP: Server request for port 58966, socket_id 0x181297FC for process 282

Mar  7 2013 10:02:28.347 UTC: TFTP: read request from host 10.69.49.1(58966) via GigabitEthernet0/0.1369

Mar  7 2013 10:02:28.347 UTC: TFTP: Looking for VG202-Dubbo.gw.usyd.edu.au.cnf.xml

Mar  7 2013 10:02:28.347 UTC: TFTP: Sending error 1 No such file

Mar  7 2013 10:02:32.007 UTC: TFTP: Server request for port 49491, socket_id 0x181297FC for process 282

Mar  7 2013 10:02:32.007 UTC: TFTP: read request from host 10.69.49.20(49491) via GigabitEthernet0/0.1369

Mar  7 2013 10:02:32.007 UTC: TFTP: Looking for SEP64A0E7F6991C.cnf.xml

Mar  7 2013 10:02:32.007 UTC: TFTP: Sending error 1 No such file

Mar  7 2013 10:03:16.195 UTC: TFTP: Server request for port 50191, socket_id 0x416EDABC for process 282

Mar  7 2013 10:03:16.195 UTC: TFTP: read request from host 10.65.22.25(50191) via GigabitEthernet0/1.3431

Mar  7 2013 10:03:16.195 UTC: TFTP: Looking for CTLSEP5C260A5703F8.tlv

Mar  7 2013 10:03:16.195 UTC: TFTP: Sending error 1 No such file

Mar  7 2013 10:03:21.223 UTC: TFTP: Server request for port 50191, socket_id 0x416EDABC for process 282

Mar  7 2013 10:03:21.223 UTC: TFTP: read request from host 10.65.22.25(50191) via GigabitEthernet0/1.3431

Mar  7 2013 10:03:21.223 UTC: TFTP: Looking for CTLSEP5C260A5703F8.tlv

Mar  7 2013 10:03:21.223 UTC: TFTP: Sending error 1 No such file

Mar  7 2013 10:03:26.259 UTC: TFTP: Server request for port 50191, socket_id 0x420B5BC0 for process 282

Mar  7 2013 10:03:26.259 UTC: TFTP: read request from host 10.65.22.25(50191) via GigabitEthernet0/1.3431

Mar  7 2013 10:03:26.259 UTC: TFTP: Looking for CTLSEP5C260A5703F8.tlv

Mar  7 2013 10:03:26.259 UTC: TFTP: Sending error 1 No such file

Mar  7 2013 10:03:31.295 UTC: TFTP: Server request for port 50191, socket_id 0x416EDABC for process 282

Mar  7 2013 10:03:31.295 UTC: TFTP: read request from host 10.65.22.25(50191) via GigabitEthernet0/1.3431

Mar  7 2013 10:03:31.295 UTC: TFTP: Looking for SEP5C260A5703F8.cnf.xml

Mar  7 2013 10:03:31.295 UTC: TFTP: Opened flash:/its/vrf1/XMLDefaultCIPC.cnf.xml, fd 8, size 1327 for process 282

Mar  7 2013 10:03:31.295 UTC: TFTP: Sending block 1 (retry 0), len 512, socket_id 0x416EDABC

Mar  7 2013 10:03:31.307 UTC: TFTP: Received ACK for block 1, socket_id

Please refer to this link, this shall help you to get this done (register)

https://learningnetwork.cisco.com/thread/34307

Br,
Nadeem 

Please rate all useful post.