Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Objective: The objective of this document where some customer/users wants to automatically or Schedule shutdown Dial-peers without any manual intervention. This came to my where we had interaction with one customer whose requirement was to shutdown ...
Just wanted to share on CSC , as there have been many instances where most of customer or Tshoot engineers come with CME GUI files located in the flash as follows:
Generally we just extract the .tar file in VGW/CME which leads to the direct...
Command Scheduler
The Command Scheduler (KRON) Policy for System Startup feature enables support for the Command Scheduler upon system startup.
The Command Scheduler allows customers to schedule fully-qualified EXEC mode CLI commands to run once, a...
We have seen issue where UCS while booting up it stuck in Shell> prompt.when Cisco Sends Bare metal UCS server loaded with VSM application, It sometimes gets it stuck in SHELL>(Prompt) which will not let you boot from thePCI RAID adapter however in...
Introduction:Video Summarizer generates snapshots from video recording and upload the snapshots to an FTP Server. This app can work independently or with VSM.1) Camera Can operates Independently. Video Summarizer App works independently when camera o...
The max length showing it support upto 128 character. do you see parsing error whee you see only 63 character are being taken. can you please confirm me the IOS version you are using..not came across any feature defect or bug but certainly love to d...
Can you please share show run from Router.
As correctly pointed by Suresh, There is no route for DN 2105551212/ dial-peer for outgoing leg match, hence we are sending 404 not found. you need to correct dial-peer or translation pattern which need to ...
is that calls hit the Hunt-group first on CUCM and then to users? Did you tried deleting and re-creating it again HG
Also if issue still persisting do you minding share CUCM traces for this scenario . and also collect the GW logs too
if your GW i...
can you please share the output of " show license status application from CUE.
make one incoming call enable below debug
debug voice ccapi inout
debug ccsip messages