Changing subnet of a VG202

[george.dixon1]

We moved our VG202's to a new building and they were previously set up by another company, we need to change the subnet in which they reside on.  Can anyone give me a hand?

Thanks

[Nadeem Ahmed]

Refer to this doc which shall help you to configure the setting.

http://www.cisco.com/c/en/us/td/docs/routers/access/vg202_vg204/software/vg2_vg4_scg/vg2_vg4_conf.html#wp1039811

[Chris Deren]

It depends on what protocol you are using to control the GW as to what needs to be done. Changing IP address on the GW is one thing, but then if you are using SIP/H323 you need to change reference of it in CUCM, etc.