Cisco 2800 to Nortel BMC 50 via SIP

[Scott Hanson]

All,

looking for a configuration guide showing how to configure a Nortel BCM 50 to connect to a 2811 router running SIP.  The goal is to send 4 digit calls out over the SIP trunk and the route with dial-peers over to Call Manager and another PBX that can already talk to Call Manager via the SIP trunk.

Thanks in advance!

All replies rated.    

[Chris Deren · Accepted solution]

Check out Cisco PBX interopererability guides for some examples:

http://www.cisco.com/en/US/solutions/ns340/ns414/ns728/networking_solutions_products_genericcontent0900aecd805b561d.html

HTH,

Chris

[Scott Hanson]

Thanks Chris,

I didn't find the Nortel guide I was looking for but did find the xxact Mitel guide I needed as well.