cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
433
Views
0
Helpful
2
Replies

Cisco 3925 as a ISDN2SIP Gateway

Hello,

We have a Cisco 3925 configured with CME 7 and enabled with the UC module. The machine also has a PRI and some BRI cards.

Is the following possible; a ISDN call comes in the Cisco 3925 (does not hit CME yet), the call is routed to our SIP platform, the SIP platform routes the call back to Cisco 3925 and a phone configured in CME should start ringing.

Is this possible?

I know it sounds odd to do this, but there are internal reasons why the call needs to travel through the SIP platform and back to the Cisco.

Thanks in advance!

Grant

 

2 Replies 2